Voltage of sounds of MP3 filesPolyphonic sounds from a microcontroller?How to output sounds over a headphone wire?Sounds or music into a DC fan?MP3 Player, does volume affect power use?What is the cheapest way of producing audible sounds?Playing a small MP3 fileHow are loudspeakers able to play many different sounds at the same time?Playing sounds using WTV020SD miniUnderstanding the concepts of sounds analysisProtect soundsystem from GSM/GPRS pulsing noise sounds
How to Aura Handle multiple DmlExceptions
Neighboring nodes in the network
Ambiguity in the definition of entropy
Blender 2.8 I can't see vertices, edges or faces in edit mode
Why was the shrinking from 8″ made only to 5.25″ and not smaller (4″ or less)?
Is it possible to download Internet Explorer on my Mac running OS X El Capitan?
Forgetting the musical notes while performing in concert
How do I handle a potential work/personal life conflict as the manager of one of my friends?
Watching something be piped to a file live with tail
Why does Optional.map make this assignment work?
Arrow those variables!
Is there a hemisphere-neutral way of specifying a season?
Assassin's bullet with mercury
Is it inappropriate for a student to attend their mentor's dissertation defense?
Asymptotics of orbits on graphs
How could indestructible materials be used in power generation?
Why do bosons tend to occupy the same state?
What's the in-universe reasoning behind sorcerers needing material components?
If human space travel is limited by the G force vulnerability, is there a way to counter G forces?
Is there a way to turn 1.0 into a integer (1) while the same function ignores 1.5 and leaves it as a float
How badly should I try to prevent a user from XSSing themselves?
Unlock My Phone! February 2018
Why doesn't H₄O²⁺ exist?
How can saying a song's name be a copyright violation?
Voltage of sounds of MP3 files
Polyphonic sounds from a microcontroller?How to output sounds over a headphone wire?Sounds or music into a DC fan?MP3 Player, does volume affect power use?What is the cheapest way of producing audible sounds?Playing a small MP3 fileHow are loudspeakers able to play many different sounds at the same time?Playing sounds using WTV020SD miniUnderstanding the concepts of sounds analysisProtect soundsystem from GSM/GPRS pulsing noise sounds
$begingroup$
What is the maximum voltage for common music files?
When playing back on a smartphone, if the volume of the smartphone is set to maximum, how much voltage is sent to the earphones of the electric signal?
thanks so much for comment
I’m japanese.
I’m not good at English.
I use google translator.
I want to use a low frequency therapy device on my smartphone. I thought it was dangerous depending on the voltage. And I asked this question. any precautions or dangers?
voltage sound
asked Mar 26 at 14:50
たくまいわきたくまいわき
425
$endgroup$
add a comment |
$begingroup$
What is the maximum voltage for common music files?
When playing back on a smartphone, if the volume of the smartphone is set to maximum, how much voltage is sent to the earphones of the electric signal?
thanks so much for comment
I’m japanese.
I’m not good at English.
I use google translator.
I want to use a low frequency therapy device on my smartphone. I thought it was dangerous depending on the voltage. And I asked this question. any precautions or dangers?
voltage sound
asked Mar 26 at 14:50
たくまいわきたくまいわき
425
$endgroup$
10
$begingroup$
if you really think about what you asked, then you will realise that you asked the kind of question that is un-answerable .... you did not define the parameters of the music file contents ........ a similar un-answerable question ishow loud is music?
$endgroup$
– jsotola
Mar 26 at 15:07
1
$begingroup$
Perhaps this is a question about the electrical interface between an audio device and a headphone or earphone set rather than a question about sampled audio data.
$endgroup$
– Solomon Slow
Mar 26 at 15:39
8
$begingroup$
The MP3 records sound intensity in a range between zero and maximum. The hardware playing the MP3 decides what "Maximum" means.
$endgroup$
– J...
Mar 26 at 17:10
1
$begingroup$
It depends on the phone and the earphone impedance, but iPhone 6 produces a maximum of about 1V RMS according to this link: anandtech.com/show/8554/the-iphone-6-review/11
$endgroup$
– Ken Shirriff
Mar 26 at 17:15
add a comment |
$begingroup$
What is the maximum voltage for common music files?
When playing back on a smartphone, if the volume of the smartphone is set to maximum, how much voltage is sent to the earphones of the electric signal?
thanks so much for comment
I’m japanese.
I’m not good at English.
I use google translator.
I want to use a low frequency therapy device on my smartphone. I thought it was dangerous depending on the voltage. And I asked this question. any precautions or dangers?
voltage sound
asked Mar 26 at 14:50
たくまいわきたくまいわき
425
$endgroup$
What is the maximum voltage for common music files?
When playing back on a smartphone, if the volume of the smartphone is set to maximum, how much voltage is sent to the earphones of the electric signal?
thanks so much for comment
I’m japanese.
I’m not good at English.
I use google translator.
I want to use a low frequency therapy device on my smartphone. I thought it was dangerous depending on the voltage. And I asked this question. any precautions or dangers?
voltage sound
voltage sound
asked Mar 26 at 14:50
たくまいわきたくまいわき
425
asked Mar 26 at 14:50
たくまいわきたくまいわき
425
edited Mar 27 at 18:08
たくまいわき
asked Mar 26 at 14:50
たくまいわきたくまいわき
425
asked Mar 26 at 14:50
たくまいわきたくまいわき
425
asked Mar 26 at 14:50
たくまいわきたくまいわき
425
425
10
$begingroup$
if you really think about what you asked, then you will realise that you asked the kind of question that is un-answerable .... you did not define the parameters of the music file contents ........ a similar un-answerable question ishow loud is music?
$endgroup$
– jsotola
Mar 26 at 15:07
1
$begingroup$
Perhaps this is a question about the electrical interface between an audio device and a headphone or earphone set rather than a question about sampled audio data.
$endgroup$
– Solomon Slow
Mar 26 at 15:39
8
$begingroup$
The MP3 records sound intensity in a range between zero and maximum. The hardware playing the MP3 decides what "Maximum" means.
$endgroup$
– J...
Mar 26 at 17:10
1
$begingroup$
It depends on the phone and the earphone impedance, but iPhone 6 produces a maximum of about 1V RMS according to this link: anandtech.com/show/8554/the-iphone-6-review/11
$endgroup$
– Ken Shirriff
Mar 26 at 17:15
add a comment |
10
$begingroup$
if you really think about what you asked, then you will realise that you asked the kind of question that is un-answerable .... you did not define the parameters of the music file contents ........ a similar un-answerable question ishow loud is music?
$endgroup$
– jsotola
Mar 26 at 15:07
1
$begingroup$
Perhaps this is a question about the electrical interface between an audio device and a headphone or earphone set rather than a question about sampled audio data.
$endgroup$
– Solomon Slow
Mar 26 at 15:39
8
$begingroup$
The MP3 records sound intensity in a range between zero and maximum. The hardware playing the MP3 decides what "Maximum" means.
$endgroup$
– J...
Mar 26 at 17:10
1
$begingroup$
It depends on the phone and the earphone impedance, but iPhone 6 produces a maximum of about 1V RMS according to this link: anandtech.com/show/8554/the-iphone-6-review/11
$endgroup$
– Ken Shirriff
Mar 26 at 17:15
10
10
$begingroup$
if you really think about what you asked, then you will realise that you asked the kind of question that is un-answerable .... you did not define the parameters of the music file contents ........ a similar un-answerable question is
how loud is music?$endgroup$
– jsotola
Mar 26 at 15:07
$begingroup$
if you really think about what you asked, then you will realise that you asked the kind of question that is un-answerable .... you did not define the parameters of the music file contents ........ a similar un-answerable question is
how loud is music?$endgroup$
– jsotola
Mar 26 at 15:07
1
1
$begingroup$
Perhaps this is a question about the electrical interface between an audio device and a headphone or earphone set rather than a question about sampled audio data.
$endgroup$
– Solomon Slow
Mar 26 at 15:39
$begingroup$
Perhaps this is a question about the electrical interface between an audio device and a headphone or earphone set rather than a question about sampled audio data.
$endgroup$
– Solomon Slow
Mar 26 at 15:39
8
8
$begingroup$
The MP3 records sound intensity in a range between zero and maximum. The hardware playing the MP3 decides what "Maximum" means.
$endgroup$
– J...
Mar 26 at 17:10
$begingroup$
The MP3 records sound intensity in a range between zero and maximum. The hardware playing the MP3 decides what "Maximum" means.
$endgroup$
– J...
Mar 26 at 17:10
1
1
$begingroup$
It depends on the phone and the earphone impedance, but iPhone 6 produces a maximum of about 1V RMS according to this link: anandtech.com/show/8554/the-iphone-6-review/11
$endgroup$
– Ken Shirriff
Mar 26 at 17:15
$begingroup$
It depends on the phone and the earphone impedance, but iPhone 6 produces a maximum of about 1V RMS according to this link: anandtech.com/show/8554/the-iphone-6-review/11
$endgroup$
– Ken Shirriff
Mar 26 at 17:15
add a comment |
5 Answers
5
active
oldest
votes
$begingroup$
Amplification
It does not depend on the music file, but at the amplifier sending the music to a speaker, or to a headphone/earplug connector.
Music file
A music file only contains 'values', and mostly in a compressed form. After uncompressing, you get values which has a certain amount on bits per value (typically 16 or more).
Conversion
A microcontroller can send these values to a speaker via an pre- and/or amplifier, which converts it into actual voltages. So it depends on the amount of amplification.
Protection
Also note that sending continuous 'max values' do not result in a loud sound, actually it would breaks the speaker (to prevent this, in the amplifier a so-called DC speaker protection is present). A wave is needed to let the speaker move outwards and inwards very fast, and this is done by sending changing values to the speaker.
Measure
If you want to measure, you can use an oscilloscope to measure the audio output while sending a sine wave with a maximum amplitude.
answered Mar 26 at 14:54
Michel KeijzersMichel Keijzers
6,77892971
$endgroup$
9
$begingroup$
Re, "...actually it breaks the speaker." If I can create a sound file that blows your speakers when you play it, the fault is not in my file. Your music player should at least be able to survive any sound file that you try to play.
$endgroup$
– Solomon Slow
Mar 26 at 15:25
2
$begingroup$
@SolomonSlow Good point, I updated my answer (and learnt something myself from it).
$endgroup$
– Michel Keijzers
Mar 26 at 15:34
4
$begingroup$
@SolomonSlow Some speakers won't be very happy if you play a mono-tone at a resonant frequency; And it happens quite often with sub woofer speakers; I'm sure you've heard some where the cone has been damaged. I agree the ideal is that the speaker should survive any input; but realistically if you find the right resonant frequency the damping of the speaker might not be sufficient to protect it.
$endgroup$
– UKMonkey
Mar 27 at 0:43
$begingroup$
@UKMonkey I'd reword it to "music system should survive any sound that can be reasonably expected to happen during normal use". And I agree that many sub woofers are badly (or rather - cheaply) designed and do not.
$endgroup$
– Mołot
Mar 27 at 9:42
$begingroup$
@Mołot no - I would say that a speaker shouldn't be damaged by the amplifier for any output of the amp within the acceptable ranges supported by the speaker. This means that if the speaker needs to be rated for a lower voltage (be it by shipping with a different amp or something else) to ensure it doesn't self destruct at 20Hz; then that's what it needs to do.
$endgroup$
– UKMonkey
Mar 27 at 10:11
|
show 2 more comments
$begingroup$
These days a lot of DAC chips for consumer equipment use voltage output of 2 Vrms.
The supply voltage is largely irrelevant, as a lot of DAC chips also use internal charge pumps to boost up supply voltage and to generate negative supply voltage for the audio output stage, so they can drive DC coupled loads directly.
answered Mar 26 at 20:24
JustmeJustme
2,1101413
$endgroup$
2
$begingroup$
"2 Vrms" here means 2 volts on average, where RMS (root mean square) is the method of calculating the average.
$endgroup$
– Sjoerd
Mar 27 at 12:38
$begingroup$
Indeed, for a digital full-scale sine wave, into a typical 10kohm load presented by a line input. So definitely it can't output the full 2Vrms into headphones that are usually few tens of ohms.
$endgroup$
– Justme
Mar 27 at 15:37
add a comment |
$begingroup$
Normally it's limited by the cellphone battery voltage, which is about 3.7V. However there are other limits in play like the EU volume limit of 100dB - which is specified as SPL rather than a voltage.
answered Mar 26 at 16:03
pjc50pjc50
34.4k34288
$endgroup$
add a comment |
$begingroup$
A line input level electrical signal typically has a voltage ranging from 0,3 to 2 Volts. "Line level" is the term for the standard used between a whole bunch of devices, namely your cell phone.
Be sure to read the other answers as they will make you aware of the specifics of your question.
answered Mar 27 at 15:55
Matthew GoulartMatthew Goulart
23519
$endgroup$
add a comment |
$begingroup$
The music files like mp3 have only digital logic levels (0's and 1's),
First the analog signals get converted into digital logic using ADC's. The ADC works like a charm here, they slice the analog signal into some simple form, the slicing frequency (sampling frequency) depends on ADC.
Now, these sliced pieces get converted into bit's (each bit represents some voltage) so the processors/controllers can understand slices and store them, usually these slices has huge data (0's and 1's) so we compress this data using mp3 compression or some other audio formats.
When you play a music file the 0's and 1's go to DAC which convert them back to an analog form, the voltage here depends upon your DAC's reference (this limits the swing of analog signal)
Here the signal is weak so we amplify it by an amplifier and feed it to speaker.
The voltage range from earphone speakers varies with the device its connected to normally 0v-3v.
answered Mar 27 at 14:43
the_mighty420the_mighty420
617
$endgroup$
$begingroup$
Microvolts? Do you have a reference for this?
$endgroup$
– evildemonic
Mar 27 at 16:34
$begingroup$
I once measured a voltage of 2.7 Vpp at my notebooks output. I doubt that microvolts are realistic
$endgroup$
– Sim Son
Mar 27 at 17:27
$begingroup$
Any time someone says "0's and 1's" it's a gross oversimplification that just confuses the issues. Music files are more than just "0s and 1"s the the same way written english is more than just "Letters A-Z"
$endgroup$
– whatsisname
Mar 28 at 1:35
add a comment |
Your Answer
StackExchange.ifUsing("editor", function ()
return StackExchange.using("mathjaxEditing", function ()
StackExchange.MarkdownEditor.creationCallbacks.add(function (editor, postfix)
StackExchange.mathjaxEditing.prepareWmdForMathJax(editor, postfix, [["\$", "\$"]]);
);
);
, "mathjax-editing");
StackExchange.ifUsing("editor", function ()
return StackExchange.using("schematics", function ()
StackExchange.schematics.init();
);
, "cicuitlab");
StackExchange.ready(function()
var channelOptions =
tags: "".split(" "),
id: "135"
;
initTagRenderer("".split(" "), "".split(" "), channelOptions);
StackExchange.using("externalEditor", function()
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled)
StackExchange.using("snippets", function()
createEditor();
);
else
createEditor();
);
function createEditor()
StackExchange.prepareEditor(
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: false,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: null,
bindNavPrevention: true,
postfix: "",
imageUploader:
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
,
onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
);
);
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function ()
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2felectronics.stackexchange.com%2fquestions%2f429142%2fvoltage-of-sounds-of-mp3-files%23new-answer', 'question_page');
);
Post as a guest
Required, but never shown
5 Answers
5
active
oldest
votes
5 Answers
5
active
oldest
votes
active
oldest
votes
active
oldest
votes
$begingroup$
Amplification
It does not depend on the music file, but at the amplifier sending the music to a speaker, or to a headphone/earplug connector.
Music file
A music file only contains 'values', and mostly in a compressed form. After uncompressing, you get values which has a certain amount on bits per value (typically 16 or more).
Conversion
A microcontroller can send these values to a speaker via an pre- and/or amplifier, which converts it into actual voltages. So it depends on the amount of amplification.
Protection
Also note that sending continuous 'max values' do not result in a loud sound, actually it would breaks the speaker (to prevent this, in the amplifier a so-called DC speaker protection is present). A wave is needed to let the speaker move outwards and inwards very fast, and this is done by sending changing values to the speaker.
Measure
If you want to measure, you can use an oscilloscope to measure the audio output while sending a sine wave with a maximum amplitude.
answered Mar 26 at 14:54
Michel KeijzersMichel Keijzers
6,77892971
$endgroup$
9
$begingroup$
Re, "...actually it breaks the speaker." If I can create a sound file that blows your speakers when you play it, the fault is not in my file. Your music player should at least be able to survive any sound file that you try to play.
$endgroup$
– Solomon Slow
Mar 26 at 15:25
2
$begingroup$
@SolomonSlow Good point, I updated my answer (and learnt something myself from it).
$endgroup$
– Michel Keijzers
Mar 26 at 15:34
4
$begingroup$
@SolomonSlow Some speakers won't be very happy if you play a mono-tone at a resonant frequency; And it happens quite often with sub woofer speakers; I'm sure you've heard some where the cone has been damaged. I agree the ideal is that the speaker should survive any input; but realistically if you find the right resonant frequency the damping of the speaker might not be sufficient to protect it.
$endgroup$
– UKMonkey
Mar 27 at 0:43
$begingroup$
@UKMonkey I'd reword it to "music system should survive any sound that can be reasonably expected to happen during normal use". And I agree that many sub woofers are badly (or rather - cheaply) designed and do not.
$endgroup$
– Mołot
Mar 27 at 9:42
$begingroup$
@Mołot no - I would say that a speaker shouldn't be damaged by the amplifier for any output of the amp within the acceptable ranges supported by the speaker. This means that if the speaker needs to be rated for a lower voltage (be it by shipping with a different amp or something else) to ensure it doesn't self destruct at 20Hz; then that's what it needs to do.
$endgroup$
– UKMonkey
Mar 27 at 10:11
|
show 2 more comments
$begingroup$
Amplification
It does not depend on the music file, but at the amplifier sending the music to a speaker, or to a headphone/earplug connector.
Music file
A music file only contains 'values', and mostly in a compressed form. After uncompressing, you get values which has a certain amount on bits per value (typically 16 or more).
Conversion
A microcontroller can send these values to a speaker via an pre- and/or amplifier, which converts it into actual voltages. So it depends on the amount of amplification.
Protection
Also note that sending continuous 'max values' do not result in a loud sound, actually it would breaks the speaker (to prevent this, in the amplifier a so-called DC speaker protection is present). A wave is needed to let the speaker move outwards and inwards very fast, and this is done by sending changing values to the speaker.
Measure
If you want to measure, you can use an oscilloscope to measure the audio output while sending a sine wave with a maximum amplitude.
answered Mar 26 at 14:54
Michel KeijzersMichel Keijzers
6,77892971
$endgroup$
9
$begingroup$
Re, "...actually it breaks the speaker." If I can create a sound file that blows your speakers when you play it, the fault is not in my file. Your music player should at least be able to survive any sound file that you try to play.
$endgroup$
– Solomon Slow
Mar 26 at 15:25
2
$begingroup$
@SolomonSlow Good point, I updated my answer (and learnt something myself from it).
$endgroup$
– Michel Keijzers
Mar 26 at 15:34
4
$begingroup$
@SolomonSlow Some speakers won't be very happy if you play a mono-tone at a resonant frequency; And it happens quite often with sub woofer speakers; I'm sure you've heard some where the cone has been damaged. I agree the ideal is that the speaker should survive any input; but realistically if you find the right resonant frequency the damping of the speaker might not be sufficient to protect it.
$endgroup$
– UKMonkey
Mar 27 at 0:43
$begingroup$
@UKMonkey I'd reword it to "music system should survive any sound that can be reasonably expected to happen during normal use". And I agree that many sub woofers are badly (or rather - cheaply) designed and do not.
$endgroup$
– Mołot
Mar 27 at 9:42
$begingroup$
@Mołot no - I would say that a speaker shouldn't be damaged by the amplifier for any output of the amp within the acceptable ranges supported by the speaker. This means that if the speaker needs to be rated for a lower voltage (be it by shipping with a different amp or something else) to ensure it doesn't self destruct at 20Hz; then that's what it needs to do.
$endgroup$
– UKMonkey
Mar 27 at 10:11
|
show 2 more comments
$begingroup$
Amplification
It does not depend on the music file, but at the amplifier sending the music to a speaker, or to a headphone/earplug connector.
Music file
A music file only contains 'values', and mostly in a compressed form. After uncompressing, you get values which has a certain amount on bits per value (typically 16 or more).
Conversion
A microcontroller can send these values to a speaker via an pre- and/or amplifier, which converts it into actual voltages. So it depends on the amount of amplification.
Protection
Also note that sending continuous 'max values' do not result in a loud sound, actually it would breaks the speaker (to prevent this, in the amplifier a so-called DC speaker protection is present). A wave is needed to let the speaker move outwards and inwards very fast, and this is done by sending changing values to the speaker.
Measure
If you want to measure, you can use an oscilloscope to measure the audio output while sending a sine wave with a maximum amplitude.
answered Mar 26 at 14:54
Michel KeijzersMichel Keijzers
6,77892971
$endgroup$
Amplification
It does not depend on the music file, but at the amplifier sending the music to a speaker, or to a headphone/earplug connector.
Music file
A music file only contains 'values', and mostly in a compressed form. After uncompressing, you get values which has a certain amount on bits per value (typically 16 or more).
Conversion
A microcontroller can send these values to a speaker via an pre- and/or amplifier, which converts it into actual voltages. So it depends on the amount of amplification.
Protection
Also note that sending continuous 'max values' do not result in a loud sound, actually it would breaks the speaker (to prevent this, in the amplifier a so-called DC speaker protection is present). A wave is needed to let the speaker move outwards and inwards very fast, and this is done by sending changing values to the speaker.
Measure
If you want to measure, you can use an oscilloscope to measure the audio output while sending a sine wave with a maximum amplitude.
answered Mar 26 at 14:54
Michel KeijzersMichel Keijzers
6,77892971
edited Mar 27 at 13:18
answered Mar 26 at 14:54
Michel KeijzersMichel Keijzers
6,77892971
answered Mar 26 at 14:54
Michel KeijzersMichel Keijzers
6,77892971
answered Mar 26 at 14:54
Michel KeijzersMichel Keijzers
6,77892971
6,77892971
9
$begingroup$
Re, "...actually it breaks the speaker." If I can create a sound file that blows your speakers when you play it, the fault is not in my file. Your music player should at least be able to survive any sound file that you try to play.
$endgroup$
– Solomon Slow
Mar 26 at 15:25
2
$begingroup$
@SolomonSlow Good point, I updated my answer (and learnt something myself from it).
$endgroup$
– Michel Keijzers
Mar 26 at 15:34
4
$begingroup$
@SolomonSlow Some speakers won't be very happy if you play a mono-tone at a resonant frequency; And it happens quite often with sub woofer speakers; I'm sure you've heard some where the cone has been damaged. I agree the ideal is that the speaker should survive any input; but realistically if you find the right resonant frequency the damping of the speaker might not be sufficient to protect it.
$endgroup$
– UKMonkey
Mar 27 at 0:43
$begingroup$
@UKMonkey I'd reword it to "music system should survive any sound that can be reasonably expected to happen during normal use". And I agree that many sub woofers are badly (or rather - cheaply) designed and do not.
$endgroup$
– Mołot
Mar 27 at 9:42
$begingroup$
@Mołot no - I would say that a speaker shouldn't be damaged by the amplifier for any output of the amp within the acceptable ranges supported by the speaker. This means that if the speaker needs to be rated for a lower voltage (be it by shipping with a different amp or something else) to ensure it doesn't self destruct at 20Hz; then that's what it needs to do.
$endgroup$
– UKMonkey
Mar 27 at 10:11
|
show 2 more comments
9
$begingroup$
Re, "...actually it breaks the speaker." If I can create a sound file that blows your speakers when you play it, the fault is not in my file. Your music player should at least be able to survive any sound file that you try to play.
$endgroup$
– Solomon Slow
Mar 26 at 15:25
2
$begingroup$
@SolomonSlow Good point, I updated my answer (and learnt something myself from it).
$endgroup$
– Michel Keijzers
Mar 26 at 15:34
4
$begingroup$
@SolomonSlow Some speakers won't be very happy if you play a mono-tone at a resonant frequency; And it happens quite often with sub woofer speakers; I'm sure you've heard some where the cone has been damaged. I agree the ideal is that the speaker should survive any input; but realistically if you find the right resonant frequency the damping of the speaker might not be sufficient to protect it.
$endgroup$
– UKMonkey
Mar 27 at 0:43
$begingroup$
@UKMonkey I'd reword it to "music system should survive any sound that can be reasonably expected to happen during normal use". And I agree that many sub woofers are badly (or rather - cheaply) designed and do not.
$endgroup$
– Mołot
Mar 27 at 9:42
$begingroup$
@Mołot no - I would say that a speaker shouldn't be damaged by the amplifier for any output of the amp within the acceptable ranges supported by the speaker. This means that if the speaker needs to be rated for a lower voltage (be it by shipping with a different amp or something else) to ensure it doesn't self destruct at 20Hz; then that's what it needs to do.
$endgroup$
– UKMonkey
Mar 27 at 10:11
9
9
$begingroup$
Re, "...actually it breaks the speaker." If I can create a sound file that blows your speakers when you play it, the fault is not in my file. Your music player should at least be able to survive any sound file that you try to play.
$endgroup$
– Solomon Slow
Mar 26 at 15:25
$begingroup$
Re, "...actually it breaks the speaker." If I can create a sound file that blows your speakers when you play it, the fault is not in my file. Your music player should at least be able to survive any sound file that you try to play.
$endgroup$
– Solomon Slow
Mar 26 at 15:25
2
2
$begingroup$
@SolomonSlow Good point, I updated my answer (and learnt something myself from it).
$endgroup$
– Michel Keijzers
Mar 26 at 15:34
$begingroup$
@SolomonSlow Good point, I updated my answer (and learnt something myself from it).
$endgroup$
– Michel Keijzers
Mar 26 at 15:34
4
4
$begingroup$
@SolomonSlow Some speakers won't be very happy if you play a mono-tone at a resonant frequency; And it happens quite often with sub woofer speakers; I'm sure you've heard some where the cone has been damaged. I agree the ideal is that the speaker should survive any input; but realistically if you find the right resonant frequency the damping of the speaker might not be sufficient to protect it.
$endgroup$
– UKMonkey
Mar 27 at 0:43
$begingroup$
@SolomonSlow Some speakers won't be very happy if you play a mono-tone at a resonant frequency; And it happens quite often with sub woofer speakers; I'm sure you've heard some where the cone has been damaged. I agree the ideal is that the speaker should survive any input; but realistically if you find the right resonant frequency the damping of the speaker might not be sufficient to protect it.
$endgroup$
– UKMonkey
Mar 27 at 0:43
$begingroup$
@UKMonkey I'd reword it to "music system should survive any sound that can be reasonably expected to happen during normal use". And I agree that many sub woofers are badly (or rather - cheaply) designed and do not.
$endgroup$
– Mołot
Mar 27 at 9:42
$begingroup$
@UKMonkey I'd reword it to "music system should survive any sound that can be reasonably expected to happen during normal use". And I agree that many sub woofers are badly (or rather - cheaply) designed and do not.
$endgroup$
– Mołot
Mar 27 at 9:42
$begingroup$
@Mołot no - I would say that a speaker shouldn't be damaged by the amplifier for any output of the amp within the acceptable ranges supported by the speaker. This means that if the speaker needs to be rated for a lower voltage (be it by shipping with a different amp or something else) to ensure it doesn't self destruct at 20Hz; then that's what it needs to do.
$endgroup$
– UKMonkey
Mar 27 at 10:11
$begingroup$
@Mołot no - I would say that a speaker shouldn't be damaged by the amplifier for any output of the amp within the acceptable ranges supported by the speaker. This means that if the speaker needs to be rated for a lower voltage (be it by shipping with a different amp or something else) to ensure it doesn't self destruct at 20Hz; then that's what it needs to do.
$endgroup$
– UKMonkey
Mar 27 at 10:11
|
show 2 more comments
$begingroup$
These days a lot of DAC chips for consumer equipment use voltage output of 2 Vrms.
The supply voltage is largely irrelevant, as a lot of DAC chips also use internal charge pumps to boost up supply voltage and to generate negative supply voltage for the audio output stage, so they can drive DC coupled loads directly.
answered Mar 26 at 20:24
JustmeJustme
2,1101413
$endgroup$
2
$begingroup$
"2 Vrms" here means 2 volts on average, where RMS (root mean square) is the method of calculating the average.
$endgroup$
– Sjoerd
Mar 27 at 12:38
$begingroup$
Indeed, for a digital full-scale sine wave, into a typical 10kohm load presented by a line input. So definitely it can't output the full 2Vrms into headphones that are usually few tens of ohms.
$endgroup$
– Justme
Mar 27 at 15:37
add a comment |
$begingroup$
These days a lot of DAC chips for consumer equipment use voltage output of 2 Vrms.
The supply voltage is largely irrelevant, as a lot of DAC chips also use internal charge pumps to boost up supply voltage and to generate negative supply voltage for the audio output stage, so they can drive DC coupled loads directly.
answered Mar 26 at 20:24
JustmeJustme
2,1101413
$endgroup$
2
$begingroup$
"2 Vrms" here means 2 volts on average, where RMS (root mean square) is the method of calculating the average.
$endgroup$
– Sjoerd
Mar 27 at 12:38
$begingroup$
Indeed, for a digital full-scale sine wave, into a typical 10kohm load presented by a line input. So definitely it can't output the full 2Vrms into headphones that are usually few tens of ohms.
$endgroup$
– Justme
Mar 27 at 15:37
add a comment |
$begingroup$
These days a lot of DAC chips for consumer equipment use voltage output of 2 Vrms.
The supply voltage is largely irrelevant, as a lot of DAC chips also use internal charge pumps to boost up supply voltage and to generate negative supply voltage for the audio output stage, so they can drive DC coupled loads directly.
answered Mar 26 at 20:24
JustmeJustme
2,1101413
$endgroup$
These days a lot of DAC chips for consumer equipment use voltage output of 2 Vrms.
The supply voltage is largely irrelevant, as a lot of DAC chips also use internal charge pumps to boost up supply voltage and to generate negative supply voltage for the audio output stage, so they can drive DC coupled loads directly.
answered Mar 26 at 20:24
JustmeJustme
2,1101413
edited Mar 27 at 9:53
answered Mar 26 at 20:24
JustmeJustme
2,1101413
answered Mar 26 at 20:24
JustmeJustme
2,1101413
answered Mar 26 at 20:24
JustmeJustme
2,1101413
2,1101413
2
$begingroup$
"2 Vrms" here means 2 volts on average, where RMS (root mean square) is the method of calculating the average.
$endgroup$
– Sjoerd
Mar 27 at 12:38
$begingroup$
Indeed, for a digital full-scale sine wave, into a typical 10kohm load presented by a line input. So definitely it can't output the full 2Vrms into headphones that are usually few tens of ohms.
$endgroup$
– Justme
Mar 27 at 15:37
add a comment |
2
$begingroup$
"2 Vrms" here means 2 volts on average, where RMS (root mean square) is the method of calculating the average.
$endgroup$
– Sjoerd
Mar 27 at 12:38
$begingroup$
Indeed, for a digital full-scale sine wave, into a typical 10kohm load presented by a line input. So definitely it can't output the full 2Vrms into headphones that are usually few tens of ohms.
$endgroup$
– Justme
Mar 27 at 15:37
2
2
$begingroup$
"2 Vrms" here means 2 volts on average, where RMS (root mean square) is the method of calculating the average.
$endgroup$
– Sjoerd
Mar 27 at 12:38
$begingroup$
"2 Vrms" here means 2 volts on average, where RMS (root mean square) is the method of calculating the average.
$endgroup$
– Sjoerd
Mar 27 at 12:38
$begingroup$
Indeed, for a digital full-scale sine wave, into a typical 10kohm load presented by a line input. So definitely it can't output the full 2Vrms into headphones that are usually few tens of ohms.
$endgroup$
– Justme
Mar 27 at 15:37
$begingroup$
Indeed, for a digital full-scale sine wave, into a typical 10kohm load presented by a line input. So definitely it can't output the full 2Vrms into headphones that are usually few tens of ohms.
$endgroup$
– Justme
Mar 27 at 15:37
add a comment |
$begingroup$
Normally it's limited by the cellphone battery voltage, which is about 3.7V. However there are other limits in play like the EU volume limit of 100dB - which is specified as SPL rather than a voltage.
answered Mar 26 at 16:03
pjc50pjc50
34.4k34288
$endgroup$
add a comment |
$begingroup$
Normally it's limited by the cellphone battery voltage, which is about 3.7V. However there are other limits in play like the EU volume limit of 100dB - which is specified as SPL rather than a voltage.
answered Mar 26 at 16:03
pjc50pjc50
34.4k34288
$endgroup$
add a comment |
$begingroup$
Normally it's limited by the cellphone battery voltage, which is about 3.7V. However there are other limits in play like the EU volume limit of 100dB - which is specified as SPL rather than a voltage.
answered Mar 26 at 16:03
pjc50pjc50
34.4k34288
$endgroup$
Normally it's limited by the cellphone battery voltage, which is about 3.7V. However there are other limits in play like the EU volume limit of 100dB - which is specified as SPL rather than a voltage.
answered Mar 26 at 16:03
pjc50pjc50
34.4k34288
answered Mar 26 at 16:03
pjc50pjc50
34.4k34288
answered Mar 26 at 16:03
pjc50pjc50
34.4k34288
answered Mar 26 at 16:03
pjc50pjc50
34.4k34288
34.4k34288
add a comment |
add a comment |
$begingroup$
A line input level electrical signal typically has a voltage ranging from 0,3 to 2 Volts. "Line level" is the term for the standard used between a whole bunch of devices, namely your cell phone.
Be sure to read the other answers as they will make you aware of the specifics of your question.
answered Mar 27 at 15:55
Matthew GoulartMatthew Goulart
23519
$endgroup$
add a comment |
$begingroup$
A line input level electrical signal typically has a voltage ranging from 0,3 to 2 Volts. "Line level" is the term for the standard used between a whole bunch of devices, namely your cell phone.
Be sure to read the other answers as they will make you aware of the specifics of your question.
answered Mar 27 at 15:55
Matthew GoulartMatthew Goulart
23519
$endgroup$
add a comment |
$begingroup$
A line input level electrical signal typically has a voltage ranging from 0,3 to 2 Volts. "Line level" is the term for the standard used between a whole bunch of devices, namely your cell phone.
Be sure to read the other answers as they will make you aware of the specifics of your question.
answered Mar 27 at 15:55
Matthew GoulartMatthew Goulart
23519
$endgroup$
A line input level electrical signal typically has a voltage ranging from 0,3 to 2 Volts. "Line level" is the term for the standard used between a whole bunch of devices, namely your cell phone.
Be sure to read the other answers as they will make you aware of the specifics of your question.
answered Mar 27 at 15:55
Matthew GoulartMatthew Goulart
23519
answered Mar 27 at 15:55
Matthew GoulartMatthew Goulart
23519
answered Mar 27 at 15:55
Matthew GoulartMatthew Goulart
23519
answered Mar 27 at 15:55
Matthew GoulartMatthew Goulart
23519
23519
add a comment |
add a comment |
$begingroup$
The music files like mp3 have only digital logic levels (0's and 1's),
First the analog signals get converted into digital logic using ADC's. The ADC works like a charm here, they slice the analog signal into some simple form, the slicing frequency (sampling frequency) depends on ADC.
Now, these sliced pieces get converted into bit's (each bit represents some voltage) so the processors/controllers can understand slices and store them, usually these slices has huge data (0's and 1's) so we compress this data using mp3 compression or some other audio formats.
When you play a music file the 0's and 1's go to DAC which convert them back to an analog form, the voltage here depends upon your DAC's reference (this limits the swing of analog signal)
Here the signal is weak so we amplify it by an amplifier and feed it to speaker.
The voltage range from earphone speakers varies with the device its connected to normally 0v-3v.
answered Mar 27 at 14:43
the_mighty420the_mighty420
617
$endgroup$
$begingroup$
Microvolts? Do you have a reference for this?
$endgroup$
– evildemonic
Mar 27 at 16:34
$begingroup$
I once measured a voltage of 2.7 Vpp at my notebooks output. I doubt that microvolts are realistic
$endgroup$
– Sim Son
Mar 27 at 17:27
$begingroup$
Any time someone says "0's and 1's" it's a gross oversimplification that just confuses the issues. Music files are more than just "0s and 1"s the the same way written english is more than just "Letters A-Z"
$endgroup$
– whatsisname
Mar 28 at 1:35
add a comment |
$begingroup$
The music files like mp3 have only digital logic levels (0's and 1's),
First the analog signals get converted into digital logic using ADC's. The ADC works like a charm here, they slice the analog signal into some simple form, the slicing frequency (sampling frequency) depends on ADC.
Now, these sliced pieces get converted into bit's (each bit represents some voltage) so the processors/controllers can understand slices and store them, usually these slices has huge data (0's and 1's) so we compress this data using mp3 compression or some other audio formats.
When you play a music file the 0's and 1's go to DAC which convert them back to an analog form, the voltage here depends upon your DAC's reference (this limits the swing of analog signal)
Here the signal is weak so we amplify it by an amplifier and feed it to speaker.
The voltage range from earphone speakers varies with the device its connected to normally 0v-3v.
answered Mar 27 at 14:43
the_mighty420the_mighty420
617
$endgroup$
$begingroup$
Microvolts? Do you have a reference for this?
$endgroup$
– evildemonic
Mar 27 at 16:34
$begingroup$
I once measured a voltage of 2.7 Vpp at my notebooks output. I doubt that microvolts are realistic
$endgroup$
– Sim Son
Mar 27 at 17:27
$begingroup$
Any time someone says "0's and 1's" it's a gross oversimplification that just confuses the issues. Music files are more than just "0s and 1"s the the same way written english is more than just "Letters A-Z"
$endgroup$
– whatsisname
Mar 28 at 1:35
add a comment |
$begingroup$
The music files like mp3 have only digital logic levels (0's and 1's),
First the analog signals get converted into digital logic using ADC's. The ADC works like a charm here, they slice the analog signal into some simple form, the slicing frequency (sampling frequency) depends on ADC.
Now, these sliced pieces get converted into bit's (each bit represents some voltage) so the processors/controllers can understand slices and store them, usually these slices has huge data (0's and 1's) so we compress this data using mp3 compression or some other audio formats.
When you play a music file the 0's and 1's go to DAC which convert them back to an analog form, the voltage here depends upon your DAC's reference (this limits the swing of analog signal)
Here the signal is weak so we amplify it by an amplifier and feed it to speaker.
The voltage range from earphone speakers varies with the device its connected to normally 0v-3v.
answered Mar 27 at 14:43
the_mighty420the_mighty420
617
$endgroup$
The music files like mp3 have only digital logic levels (0's and 1's),
First the analog signals get converted into digital logic using ADC's. The ADC works like a charm here, they slice the analog signal into some simple form, the slicing frequency (sampling frequency) depends on ADC.
Now, these sliced pieces get converted into bit's (each bit represents some voltage) so the processors/controllers can understand slices and store them, usually these slices has huge data (0's and 1's) so we compress this data using mp3 compression or some other audio formats.
When you play a music file the 0's and 1's go to DAC which convert them back to an analog form, the voltage here depends upon your DAC's reference (this limits the swing of analog signal)
Here the signal is weak so we amplify it by an amplifier and feed it to speaker.
The voltage range from earphone speakers varies with the device its connected to normally 0v-3v.
answered Mar 27 at 14:43
the_mighty420the_mighty420
617
edited Mar 28 at 4:51
answered Mar 27 at 14:43
the_mighty420the_mighty420
617
answered Mar 27 at 14:43
the_mighty420the_mighty420
617
answered Mar 27 at 14:43
the_mighty420the_mighty420
617
617
$begingroup$
Microvolts? Do you have a reference for this?
$endgroup$
– evildemonic
Mar 27 at 16:34
$begingroup$
I once measured a voltage of 2.7 Vpp at my notebooks output. I doubt that microvolts are realistic
$endgroup$
– Sim Son
Mar 27 at 17:27
$begingroup$
Any time someone says "0's and 1's" it's a gross oversimplification that just confuses the issues. Music files are more than just "0s and 1"s the the same way written english is more than just "Letters A-Z"
$endgroup$
– whatsisname
Mar 28 at 1:35
add a comment |
$begingroup$
Microvolts? Do you have a reference for this?
$endgroup$
– evildemonic
Mar 27 at 16:34
$begingroup$
I once measured a voltage of 2.7 Vpp at my notebooks output. I doubt that microvolts are realistic
$endgroup$
– Sim Son
Mar 27 at 17:27
$begingroup$
Any time someone says "0's and 1's" it's a gross oversimplification that just confuses the issues. Music files are more than just "0s and 1"s the the same way written english is more than just "Letters A-Z"
$endgroup$
– whatsisname
Mar 28 at 1:35
$begingroup$
Microvolts? Do you have a reference for this?
$endgroup$
– evildemonic
Mar 27 at 16:34
$begingroup$
Microvolts? Do you have a reference for this?
$endgroup$
– evildemonic
Mar 27 at 16:34
$begingroup$
I once measured a voltage of 2.7 Vpp at my notebooks output. I doubt that microvolts are realistic
$endgroup$
– Sim Son
Mar 27 at 17:27
$begingroup$
I once measured a voltage of 2.7 Vpp at my notebooks output. I doubt that microvolts are realistic
$endgroup$
– Sim Son
Mar 27 at 17:27
$begingroup$
Any time someone says "0's and 1's" it's a gross oversimplification that just confuses the issues. Music files are more than just "0s and 1"s the the same way written english is more than just "Letters A-Z"
$endgroup$
– whatsisname
Mar 28 at 1:35
$begingroup$
Any time someone says "0's and 1's" it's a gross oversimplification that just confuses the issues. Music files are more than just "0s and 1"s the the same way written english is more than just "Letters A-Z"
$endgroup$
– whatsisname
Mar 28 at 1:35
add a comment |
Thanks for contributing an answer to Electrical Engineering Stack Exchange!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
Use MathJax to format equations. MathJax reference.
To learn more, see our tips on writing great answers.
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function ()
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2felectronics.stackexchange.com%2fquestions%2f429142%2fvoltage-of-sounds-of-mp3-files%23new-answer', 'question_page');
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
10
$begingroup$
if you really think about what you asked, then you will realise that you asked the kind of question that is un-answerable .... you did not define the parameters of the music file contents ........ a similar un-answerable question is
how loud is music?$endgroup$
– jsotola
Mar 26 at 15:07
1
$begingroup$
Perhaps this is a question about the electrical interface between an audio device and a headphone or earphone set rather than a question about sampled audio data.
$endgroup$
– Solomon Slow
Mar 26 at 15:39
8
$begingroup$
The MP3 records sound intensity in a range between zero and maximum. The hardware playing the MP3 decides what "Maximum" means.
$endgroup$
– J...
Mar 26 at 17:10
1
$begingroup$
It depends on the phone and the earphone impedance, but iPhone 6 produces a maximum of about 1V RMS according to this link: anandtech.com/show/8554/the-iphone-6-review/11
$endgroup$
– Ken Shirriff
Mar 26 at 17:15